Finally part 2! Here are some sample images made on my M7 Leica and my Rollei 2.8 (F – 1960) using Fuji Acros at an EI of 160.
The two square images of course were shot with the Rollei (120mm) and the hand and zipper image was made with my Leica M7. Full size the Rollei images are 18″ x 18″ (142MB, 16 Bit, Grayscale, 120mm Negative, 3200 dpi scan) and the hand and zipper image is 16″x 24″ (160MB, 16 Bit, Grayscale, 35mm Negative, 6300 dpi scan). The detail crop of the zipper represents approx a 3″x4″ section of the larger 16″x24″ print…amazing!
Here is how I processed it…
Fuji Acros 100…EI 160
- Diafine Developer at 68-72 F
- Part A 4.5 minutes (two inversions every minute…gentle.)
- Part B 4.5 minutes (two inversions every minute…gentle.)
- Water Stop 1 minute Fill and Dump (68-72 F)
- Fix Kodak Rapid (5 minutes)
- Wash 1 minute running water (68-72 F)
- Perma Wash 1 minute constant agitation
- Wash 5 minutes (65-75 F)
For more information on the process and testing conducted please listen to the audioblog link below….
TIP– When your developer starts to get dirty…say after 30 plus rolls just run it through a coffee filter to “clean” it…use a different filter of course for each solution.