BERGGER Pancro 400 • 120 Film Mini Review

I have been a fan of BERGGER films off and on now for well over a decade. Since it was released a few years ago, the 4×5 Pancro 400 has been a go-to film for my large format work. So, of course, the announcement back in September 2016 that Pancro 400 would also be released in 120 and 35mm had me REALLY excited.

After some delays the film in these new formats has now been released and I have started testing the 120 version in my Noblex 150UX. As you can see below, I have been testing in 3 different developers: PMK, Rodinal 1+25 and Caffenol (in-house recipe). (The PMK and Rodinal times and temps are directly from BERGGER-supplied information and appear to be spot on.)




Some initial thoughts on this film in 120 format:

1. Rate the film at 320 for PMK and Rodinal.

2. Very nice highlight and contrast control– even under extreme conditions like the test above.

3. Grain is softer than 400TX and not as fine.

4. Can be exposed at EI 100-800 with very good results in the developers tested.

5. Biggest drawback? At this date it is not available in the USA in smaller formats (35mm and 120), I had to order from the EU.

So- is it worth switching from 400TX or HP5+ to this film? It depends. The rendering is a very classic film look, very silver-rich, very different from a lot of other modern films on the market. If that sounds appealing to you, I highly recommend going the extra mile, ordering the film from Europe and doing a side by side and seeing for yourself. For my own part, I am glad now to add the Pancro 400 in my medium format repertoire.

Viva la Revolution-


Link to BERGGER Pancro 400 Data Sheet

8 thoughts on “BERGGER Pancro 400 • 120 Film Mini Review

  1.  Which caffenol developer did you use, regular or caffenol C or something else? I’ve got a box of Bergger 4×5 and also use caffenol.  

  2. How do you like it compared to BRF-400 (discontinued)? Thanks for the review! My brick of pancro 400 (35mm) arrived from Japan a couple weeks ago. Still haven’t had time to run any through my camera though.

  3. Thanks for all the information you share in your bolg, I find it remarkably helpful. I know about Pancro 400 since some time ago and is now that I have decided to try it. My question is about using Rodinal. How would it result if using 1+50 solution, would be there any difference in terms of contrast, highlight, shadows and grain size? Also, if you rate the film to 320, should be made any change in the time developing process? Thanks again.

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s